Posts for tag: orthodontic treatment
The movie Bohemian Rhapsody celebrates the iconic rock band Queen and its legendary lead vocalist, Freddie Mercury. But when we see pictures of the flamboyant singer, many fans both old and new may wonder—what made Freddie’s toothy smile look the way it did? Here’s the answer: The singer was born with four extra teeth at the back of his mouth, which caused his front teeth to be pushed forward, giving him a noticeable overbite.
The presence of extra teeth—more than 20 primary (baby) teeth or 32 adult teeth—is a relatively rare condition called hyperdontia. Sometimes this condition causes no trouble, and an extra tooth (or two) isn’t even recognized until the person has an oral examination. In other situations, hyperdontia can create problems in the mouth such as crowding, malocclusion (bad bite) and periodontal disease. That’s when treatment may be recommended.
Exactly what kind of treatment is needed? There’s a different answer for each individual, but in many cases the problem can be successfully resolved with tooth extraction (removal) and orthodontic treatment (such as braces). Some people may be concerned about having teeth removed, whether it’s for this problem or another issue. But in skilled hands, this procedure is routine and relatively painless.
Teeth aren’t set rigidly in the jawbone like posts in cement—they are actually held in place dynamically by a fibrous membrane called the periodontal ligament. With careful manipulation of the tooth, these fibers can be dislodged and the tooth can be easily extracted. Of course, you won’t feel this happening because extraction is done under anesthesia (often via a numbing shot). In addition, you may be given a sedative or anti-anxiety medication to help you relax during the procedure.
After extraction, some bone grafting material may be placed in the tooth socket and gauze may be applied to control bleeding; sutures (stitches) are sometimes used as well. You’ll receive instructions on medication and post-extraction care before you go home. While you will probably feel discomfort in the area right after the procedure, in a week or so the healing process will be well underway.
Sometimes, dental problems like hyperdontia need immediate treatment because they can negatively affect your overall health; at other times, the issue may be mainly cosmetic. Freddie Mercury declined treatment because he was afraid dental work might interfere with his vocal range. But the decision to change the way your smile looks is up to you; after an examination, we can help you determine what treatment options are appropriate for your own situation.
If you have questions about tooth extraction or orthodontics, please contact our office or schedule a consultation. You can read more in the Dear Doctor magazine articles “Simple Tooth Extraction” and “The Magic of Orthodontics.”
Wearing orthodontic braces brings challenges to daily life. During treatment a patient will need to avoid certain foods and habits, take more time to brush and floss properly, and may endure occasional discomfort. But the effect of metal braces on appearance can be especially difficult, especially for peer-conscious teens.
Clear aligners, though, offer an alternative to braces that could make some of these challenges easier, particularly with your appearance. Aligners are clear plastic trays that fit over the teeth to move them. They can be removed by the wearer for easier brushing and flossing or for special occasions. Best of all, they're much less noticeable than metal braces.
Clear aligners were developed thanks to advances in digital technology. An orthodontist uses a computer application incorporating the data from photographs, x-rays or CT scans of a patient's teeth and jaws to produce a series of clear plastic trays. The patient then wears each tray for about two weeks before changing to the next tray in the sequence.
The trays apply pressure much like metal braces to gradually move teeth to the desired position on the jaw. Each tray is slightly smaller in size than the previous tray in the sequence, so that the progression of tooth movement continues with each succeeding tray. The treatment time is about the same as with conventional braces.
This new orthodontic tool works well for many common bite problems, but until recently they've been limited in scope. But new designs in trays and attachments called buttons added to teeth to provide more leverage have greatly increased their use for more complex bite issues.
Clear aligners also have one other disadvantage, ironically due to one of their principal benefits, removability. Although they can be taken out, they must be worn consistently to achieve results. Some younger patients may not have the maturity level and discipline to responsibly wear their aligners as they should.
That's one issue you'll need to discuss with your orthodontist if you're considering clear aligners for your teen. But if they can maintain wearing consistency, and they have a bite problem that can be corrected with aligners, both you and your teen may find this choice more agreeable and attractive than braces.
If you would like more information on clear aligners, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Clear Aligners for Teens.”
While crooked teeth are usually responsible for a malocclusion (poor bite), the root cause could go deeper: a malformed maxilla, a composite structure composed of the upper jaw and palate. If that’s the case, it will take more than braces to correct the bite.
The maxilla actually begins as two bones that fit together along a center line in the roof of the mouth called the midline suture, running back to front in the mouth. The suture remains open in young children to allow for jaw growth, but eventually fuses during adolescence.
Problems arise, though, when these bones don’t fully develop. This can cause the jaw to become too narrow and lead to crowding among the erupting teeth and a compromised airway that can lead to obstructive sleep apnea. This can create a cross-bite where the upper back teeth bite inside their lower counterparts, the opposite of normal.
We can remedy this by stimulating more bone growth along the midline suture before it fuses, resulting in a wider maxilla. We do this by installing a palatal expander, an appliance that incrementally widens the suture to encourage bone formation in the gap, which over time will widen the jaw.
An expander is a metal device with “legs” extending out on both sides and whose ends fit along the inside of the teeth. A gear mechanism in the center extends the legs to push against the teeth on both sides of the jaw. Each day the patient or caregiver uses a key to give the gear a quarter turn to extend the legs a little more and widen the suture gap. We remove the expander once the jaw widens to the appropriate distance.
A palatal expander is an effective, cost-efficient way to improve a bite caused by a narrow jaw, but only if attempted before the bones fuse. Widening the jaw after fusion requires surgery to separate the bones — a much more involved and expensive process.
To make sure your child is on the right track with their bite be sure to see an orthodontist for an evaluation around age 6. Doing so will make it easier to intervene at the proper time with treatments like a palatal expander, and perhaps correct bite problems before they become more expensive to treat.
If you would like more information on treating malocclusions, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Palatal Expanders: Orthodontics is more than just Moving Teeth.”
Although tooth decay is a major problem to watch for in your child’s teeth, it isn’t the only one. As their teeth transition from primary (“baby”) to permanent, you should also be on the lookout for a developing poor bite or malocclusion.
Although the signs can be subtle, you may be able to detect an emerging malocclusion, starting usually around age 6, if you know what to look for. Here are 4 signs your child may be developing a poor bite.
Excessive spacing. This is something that might be noticeable while the child still has their primary teeth. If you notice an excessive amount of space around the front teeth, the sizes of the jaws and the teeth may be disproportional.
Abnormal overlapping. The upper teeth normally just cover the bottom teeth when the jaws are closed. But a malocclusion may be forming if the lower teeth cover the upper (underbite), the upper teeth extend too far over the lower (deep bite) or there’s space between the upper and lower front teeth (open bite).
Different overlapping patterns. Watch as well for some of the teeth overlapping normally while others don’t, a sign of a cross bite. For example, the back upper teeth may cover their counterparts in a normal fashion while the lower front teeth abnormally overlap the top front. The roles here between front and back teeth can also be reversed.
Abnormal eruptions. Permanent teeth normally follow a pattern when erupting, but certain factors could disrupt the process. For example, a jaw that’s developed too small can cause crowding as incoming teeth vie for space; as a result, some permanent teeth may erupt out of their proper position. Likewise, if a baby tooth is out of its normal position or prematurely lost, the permanent tooth may erupt out of position too.
The good news with each of these developing bite problems is that we can correct them or at least minimize their future effect if caught early. So if you notice any of these signs or anything else out of the ordinary, see an orthodontist as soon as possible. It’s also a good idea to have your child undergo a thorough orthodontic evaluation around age 6.
If you would like more information on bite problems in children, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Problems to watch for in Children Ages 6 to 8.”
What do a teenager with a poor bite, a senior citizen with multiple missing teeth or a middle-aged person with a teeth grinding habit all have in common? They may all depend on a dental appliance for better function or appearance.
There’s a wide variety of removable dental appliances like clear aligners or retainers for orthodontic treatment, dentures for tooth loss or night guards to minimize teeth grinding, just to name a few. But while different, they all share a common need: regular cleaning and maintenance to prevent them from triggering dental disease and to keep them functioning properly.
The first thing to remember about appliance cleaning is that it’s not the same as regular oral hygiene, especially if you have dentures. While they look like real teeth, they’re not. Toothpaste is a no-no because the abrasives in toothpaste designed for tooth enamel can scratch appliance surfaces. These microscopic scratches can develop havens for disease-causing bacteria.
Instead, use liquid dish detergent, hand soap or a specific cleaner for your appliance with a different brush from your regular toothbrush or a specialized tool for your particular appliance. Use warm but not very hot or boiling water: while heat indeed kills bacteria, the hot temperatures can warp the plastic in the appliance and distort its fit. You should also avoid bleach—while also a bacteria killer, it can fade out the gum color of appliance bases.
Be sure you exercise caution while cleaning your appliance. For example, place a towel in the sink basin so if the appliance slips from your hands it’s less likely to break hitting the soft towel rather than the hard sink. And while out of your mouth, be sure you store your appliance out of reach of small children and pets to avoid the chance of damage.
Cleaning and caring for your appliance reduces the risk of disease that might affect your gums or other natural teeth. It will also help keep your appliance working as it was designed for some time to come.